Open Access Open Access  Restricted Access Subscription or Fee Access

Analysis and Design of Tapered Web Pre-engineered Building (PEB) Structure for Siesmic Zones

Pushkaraj Mane, S.G. Ban

Abstract


The use of PEB instead of a conventional steel building (CSB) design idea resulted in a number of benefits, since the members were designed according to a bending moment diagram, lowering the amount of material required. Because of its high-quality pre-design and prefabrication, as well as its light weight and cost-effectiveness, this methodology is flexible. If we use ordinary steel constructions, the time frame will be longer, and the cost will be higher, making it uneconomical in the long run. This research project will bring together many issues that must be considered when designing web-tapered portal frames, as well as assess whether this way of construction is safe and worth pursuing as an alternative to traditional building approaches. The purpose of this study is to compare traditional steel buildings to modern steel buildings. This study examined and built web tapered portal frames and conventional steel buildings using computer tools.  Steel portal frames with web tapered webs are appropriate for building in isolated and hilly places.

Full Text:

PDF

References


Lovneesh Sharma, NileshwarTaak, Pankaj Kumar Mishra”, A comparative study between the pre-engineered structures and conventional structures using STAADPRO, Elsevier 2021

A Data Technology Oriented to Information Fusion to Build an Intelligent Accounting Computerized Model ZiyanXu and WenxueZhou, Scientific Research Article 8 December 2021

TejasDodiya, Jigar Zala, Darshan Shah “Parametric Study on Conventional and PreEngineered Multi-storey Steel Building with Varying Height and Span”, IJARSCT (1stJuly 2021)

RavirajS. Gaikwad1, Dhananjay S. Patil 2, The Economics of Landfill Mining, IJRETS: International Journal of Research in Engineering, Technology and Science, Volume XIII, Issue VIII, September, 2020

Comparative analysis of pre-engineered building and conventional steel building by StaadPro Mr. Hitesh Jibhkate, Prof. DilipL. Budhlani, International Research Journal of Modernization in Engineering Technology and Science, July 2021

Ms. Shalaka Patil, Prof. Dr. M.B. Kumthekar,“Cost Comparative Study of PEB with Conventional Method for Industrial Building” IJARIIE-ISSN(O)-2395-4396 Vol-7 Issue-12021

Study on Comparison between Prefabricated and Conventional Structures, Suraj kinase, Gajanan Gaikwad, International Journal of Research in Engineering and Science (IJRES)2021

D.T. Lamkhade, G.S. Wayal, M. R. Sharma, Analysis and Design of Web Tapered Beams and Columns using Finite Element Analysis in Portal Frame Buildings, International Journal of Engineering Research & Technology (IJERT) Vol. 9 Issue 08, August-2020

Advantages of Pre-Engineered Building over Conventional Building Rajnandan Verma, Raghvendra Singh, International Journal of Innovative Technology and Exploring Engineering (IJITEE), January 2020

Cost Comparison Between Normal Building and Green Building Considering Its Construction and Maintenance Phase, Sneha S. Nagrale, International Journal of Scientific Research and Engineering Development-Volume 3 Issue 4, July –Aug 2020

Comparative Study of Warehouse Structure in P.E.B. with C.S.B. 1Bhupesh Kumar, International Journal of Trend in Research and Development, June 2020

Benefits and Challenges of PEB Construction in India–A Review, Azharuddin Ahmed, International Journal of Civil Engineering, July 2020

Chetan Gurjar1, prof. J.N. vyas2, Seismic Analysis of Pre-Engineering Steel Structure Using Vertical Irregularity, IJSART-Volume 6 Issue 11–NOVEMBER 2020 ISSN [ONLINE]:2395-1052

A Review on “Comparative Study between Cast-In-Situ Construction and Prefab Construction using Primavera Software” Mr. Sarvapalli S. Ikhar1 Dr. Leeladhar S. Pammar, International Journal for Scientific Research & Development| Vol. 8, Issue 3, 2020

Performance Evaluation of RC Framed Structures With and Without Shear Wall Using Staad PRO R.M. Saravana Kumara*, S. Sivaranjania, R. Devananthb, A. Aravindanc, D. Zunaithur Rahmand, European Journal of Molecular & Clinical Medicine ISSN 2515-8260 Volume 07, Issue 11, 2020

Design Solutions for Sustainable Construction of Pre Engineered Steel Buildings Muhammad Umair Saleem * and Hisham Jahangir Qureshi,: 15 April 2018; Accepted: 25 May 2018; Published: 28 May 2018

Nonlinear Analysis of Irregular Buildings Considering the Direction of Seismic Waves Prajwal T P*a, Imtiaz A Parvezb, Kiran Kamathc, ICEMS2016

Wind Load Analysis for Industrial Building With Different Bracing Patterns and its Comparison With Pre Engineered Building SeenaSomasekharan, Vasugi K, International Journal of Civil Engineering and Technology (IJCIET) Volume 8, Issue 4, April 2017

Analysis in seismic provisions for buildings: past,present and future The fifth Prof. Nicholas Ambraseys lecture Peter Fajfar1,Bull Earthquake Eng (2018)

Seismic vulnerability assessment of soft story irregular buildings using pushover analysis Adrian Fredrick C. Dyaa,*, Andres Winston C. Oretaaa Procedia Engineering 125 ( 2015)

Sudhir Singh Bhadoria, Comparative study of Pre-engineered building and Conventional steel building, International Research Journal of Engineering and Technology (IRJET), Sep-2017,ISSN:2395-0056, Volume 4, Issue 09

Swati Wakchaure Design and Comparative Study of Pre-Engineered building, International Journal of Engineering Development and Research (IJEDR), 2016, ISSN: 2321-9939, Vol. 4, Issue 2

Syed Firoz Design Concept of Pre-engineered building, International Journal of Engineering (IJERA), April-2012, ISSN:2248-9622, Volume 2, Issue 2

Aijaz Ahmad Zende Comparative Study of Analysis and Design of Pre-engineered building and Conventional Frames, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Feb-2013, ISSN:2278-1684, Vol. 5

BK Raghu Prasad, Kavya AJ, Amarnath K, ‘ Comparative Performance of Octagrid and Hexagrid Lateral Load Resisting Systems For Tall Building Structure’ November 2017

Hetalparekh, Agam shah, ‘The Triple Bottom Line Benefits of Climate-Responsive Dynamic Façades ’ 2018.

Zeba J. Sayyed “Seismic Analysis of Honeycomb Structure over Conventional Structure with the Comparative Study by Using STAAD PRO” International Journal of Innovative Science and Research Technology July 2017

P. Y. Pawade, “Seismic Behavior of Honeycomb Structure with Conventional Structure by using STAAD Pro” IJSRD2016

Deepak Laata, “Results and Analysis of Hexagrid and Diagrid Systems in Multi Storey Buildings” International Journal of Science, Engineering andTechnology 2019

G. Arun Reddy, Kanna Ashok Reddy, “A Critical Review of Composite Materials for Buildings, Thermal, Aerospace and Cryogenic Application” International Journal of Civil Engineering and Technology

Mir Ali and Kyoung Sun Moon “Structural Developments In Tall Buildings: Current Trends And Future Prospect”, 13 June2017.

Zeba J. Sayyed, Prof A.A. Hamne Seismic Analysis of High-Rise Building by Response Spectrum Method, International Journal of Emerging Trends in Science and Technology 2018

Comparative Study Of Pre Engineered And Conventional Steel Building HumanaazArif Qureshi, Dr. Kuldeep R. Dabhekar, IOSR Journal of Engineering (IOSRJEN), Dec.2019

Dinesh Kumar et al., –comparative study on prefabricated construction with the cast in situ construction of the residential building.(2015).

Siva Priya et al., –Building cost comparison of precast vs conventional construction.(2016).

Santosh S. Patil and Sujay Deshpande, "A Study on the Structural Analysis and Design of PreEngineered Buildings for Different Geometries" International Journal for Research in Applied Science & Engineering Technology, Volume 6, Issue VI, 2018.

Dhanaraj S. Aundhkar, Dr. Ashok Kasnale, Prof. Vishwajeet A. Kadlag “Analysis & Design of Pre-Engineered Building using Jack Beam & its use in steel industry”, International Journal of Innovative Research in Science, Engineering and Technology Volume 9, Issue7, July 2020

Suraj Tale, K. Vasugi “ Effect of Bracing under Different Loading for Conventional and Pre Engineering Industrial Structure” International Journal of Recent Technology and Engineering (IJRTE) Volume-8, Issue-1, May 2019

B. Ravali, P. Poluraju, “Seismic Analysis of Industrial Structure Using Bracings and Dampers” International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-7, Issue-6C2, April 2019

Mitaali Jayant Gilbile, S.S. Mane, ”A Review on Comparative Study on the Structural Analysis and Design of Pre-Engineered Building [PEB] with Conventional Steel Building [CSB]” International Journal of Engineering Research &Technology (IJERT) Vol. 9 Issue 09, September-2020




DOI: https://doi.org/10.37628/jsea.v8i1.756

Refbacks

  • There are currently no refbacks.