Open Access Open Access  Restricted Access Subscription or Fee Access

Comparative Analysis of Strengthening of RC Beam Column Joint Using Ansys

Rahul U Pawar

Abstract


The biggest impact of earthquake on a building structure is at the beam column joint. Many researchers have tried to find solution to minimize the beam-column joint cracks and increase the strength of joint. This article leads to the seismic analysis using ANSYS software. This article is the validation of the experimental method did by the researcher. Proposed analysis is on the same loads as in the experimental methods and compared with the analysis results.

Full Text:

PDF

References


Ozgur Yurdakul, Ozgur Avsarb, ‘Strengthening of substandard reinforced concrete beam-column joints by external post-tension rods’, Engineering Structures. 2016; 107: 9-22.

G. Campione, L. Cavaleri, M. Papia, ‘Flexural response of external R.C. beam– column joints externally strengthened with steel cages’ Engineering Structures, 2015; 104: 51-64.

Jalil Shafaei, Abdollah Hosseini, Mohammd Sadegh Marefat, ‘Seismic retrofit of external RC beam–column joints by joint enlargement using prestressed steel angles, Engineering Structures, 2015; 81: 265-288.

Giuseppe Santarsiero, Angelo Masi, ‘Seismic performance of RC beam–column joints retrofitted with steel dissipation jackets’, Engineering Structures, 2015; 85: 95-106.

Constantin E. Chalioris, Kosmas E. Bantilas, ‘Shear strength of reinforced concrete beam-column joints with crossed inclined bars’, Engineering Structures, 2017; 140: 241–255.

M. Kazem Sharbatdar, A. Kheyroddin, E. Emami, ‘Cyclic performance of retrofitted reinforced concrete beam–column joints using steel prop’, Construction and Building Materials, 2012; 36: 287-294.

CATIA P2 V5R20 GA(SP0) software.

Ahmed Ghobarah, A. Said, ‘Shear strengthening of beam-column joints’ Engineering Structures, 2002; 24: 882-888.

Jose M. Adam, Salvador Ivorra, Ester Giménez, PedroCalderón, ‘Behaviour of axially loaded RC columns strengthened by steel angles and strips’ Steel and Composite Structures, 2007; 7(5) 405-419.

Esmaeel Esmaeeli, Joaquim A.O. Barros, Jose Sena- Cruz, HumbertoVarum, José Melo, ‘Assessment of the efficiency of prefabricated hybrid composite plates(HCPs) for retrofitting of damaged interior RC beam– column joints’, Composite Structures, 2015; 119 : 24–37.

Zhangcheng Pan, SerhanGuner, Frank J. Vecchio, ‘Modeling of interior beam-column joints for nonlinear analysis of reinforced concrete frames’, Engineering Structures, 2017; 142: 182–191.

George I. Kalogeropoulos, Alexander- Dimitrios G. Tsonos, Dimitrios Konstandinidis, Stylianos Tsetines, ‘Pre-earthquake and post-earthquake retrofitting of poorly detailed exterior RC beam-to-column joints’, Engineering Structures, 2016; 109: 1–15.

Ansys R18.2 Software.

Rahmani Kadarningsiha, Imam Satyarnoa, Muslikha, Andreas Triwiyono, ‘Proposals of beam column joint reinforcement in reinforced concrete moment resisting frame: A literature review study’, Procedia Engineering, 2014; 95:158- – 171.

Bindhu K.R, K P Jaya, ‘Strength and behaviour of exterior beam column joints with diagonal cross bracing bars’, Asian Journal of Civil Engineering (Building and Housing), 2010; 11(3): 397-410.

Peizhou Zhang, ShuangHou, JinpingOu, ‘A beam– column joint element for analysis of reinforced concrete frame structures’, Engineering Structures, 2016; 118:125–13




DOI: https://doi.org/10.37628/jsea.v4i2.385

Refbacks

  • There are currently no refbacks.