Effect of Varying Shear Velocity on the Mechanical Behavior of Jointed Rock Subjected To Lower Normal Load
Abstract
Full Text:
PDFReferences
Patton F.D. Multiple Modes of Shear Failure in Rock, In: 1st Congress of the International Society of Rock Mechanics, Lisbon, 1966, 509–13p.
Barton N. Review of a new shear strength criterion for rock joints, Eng Geol. 1973; 7: 287–332p.
Teufel L.W., Logan J.M. Effect of displacement rate on the real area of contact and temperatures generated during frictional sliding of tennessee sandstone, J Appl Geophys. 1978; 116(4-5): 840–65p.
Crawford M., Curran J.H. The influence of shear velocity on the frictional resistance of rock discontinuities, Int J Rock Mech Min Sci Geomech. 1981; 18(6): 505–15p.
Jafari M.K., Hosseini K.A., Boulon M., et al. Laboratory investigation on shear strength variation of joint replicas due to low and high amplitude cyclic displacements, JSEE: Summer Fall. 2002; 4(2): 37–49p.
Budi G., Rao K.U.M., Deb D. Laboratory modelling of rock joints under shear and constant normal loading, Int J Res Eng Technol. 2014; 3(4): 190–200p.
Yano T. Experimental study on the shear behavior of small block of rock mass, PhD Thesis. Kyoto University, Japan, 2003.
Tse R., Cruden D.M. Estimating joint roughness coefficients, Int J Rock Mech Min Sci Geomech. 1979; 16(5): 303–7p.
Yu X., Vayssade B. Joint profile and their roughness parameter, Int J Rock Mech Min Sci Geomech. 1991; 28(4): 333–6p.
Barton N., Choubey V. The shear strength of rock joints in theory and practice, Rock Mech. 1977; 10: 1–54p.
Hopkins D. The implications of joint deformation in analyzing the properties and behavior of fractured rock masses, underground excavations, and faults, Int J Rock Mech Min Sci Geomech. 2000; 37(1–2): 175–202p.
Kishida K., Sakurai Y. Improvement of the mechanical shear model for rock joints considering the bearing effect, Soils Found. 2007; 47(3): 613–28p.
Hoang T.T.N., Barbier M.G. Mechanical behavior of natural marble discontinuities, In: Rock Mechanics in Civil and Environmental Engineering. Duth and Mathier, 2010, 215–8p.
Wibowo J., Amadei B., Price R.H., et al. Effect of roughness and material strength on the mechanical properties of fracture replicas, Sandia Report, Yucca Mountain Site Characterization Project. 1995.
Rao K.S. Shear behaviour of rock joints under CNS boundary conditions, Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering. 2013, 961–4p.
DOI: https://doi.org/10.37628/jgget.v2i1.68
Refbacks
- There are currently no refbacks.