STRUCTURE HEALTH MONITORING AND ENERGY HARVESTING IN BRIDGE, VUPs BY SMART MATERIALS
DOI:
https://doi.org/10.37628/jsea.v5i1.439Abstract
This artical examine the energy harvesting by the use of Smart material in the bridges or VUPs( vehicle underpass ) . For harvesting energy from bridges vibrations , there are mainly three different kinds of mechanism: electromagnetic , piezoelectric, electrostatic. among the three , the piezoelectric-based energy harvesting is a very mature one , which has been widely used . At the same time structure health monitoring can be done by the use of piezoelectric material .Structure Health Monitoring (SHM) gives aims to give a diagonsis at every moment during the life of a structure which reduce the life cycle cost.References
Daniel Balageas, claus-peter Fritzen and Alfredo Guemes "Structural Health Monitoring".
Ye Zhang, Steve CS Cai and Lu Dengn (2014), vol. 25(12)1414-1428 "Journal Of Inelligent Material Systems And Structures".
Lynch J and Loh K (2006) A summary review of wireless sensors and sensor network for structural health monitoring . shock and vibration digest 38(2): 91-128.
Vistasp M. Karbhari and Farhad Anshari " structural health monitoring of civil infrastructure systems. " Piezoelectric Based Energy Harvesting In Bridge Systems.
Victor Giurgiutiu " Structural Health Monitoring with piezoelectric wafer active sensors.
Claus-Peter Fritzen , key engineering materials vols. 293-294(2005)pp 3-20,"vibration based structural health monitoring - concepts and apllications.
