Seismic Bearing Capacity of Strip Footing Subjected to Eccentric Load

Authors

  • Tinku Biswas Department of Civil Engineering, Ganga Institute of Technology and Management, Jhajjar, Haryana
  • Sitender Chhilar Department of Civil Engineering, Ganga Institute of Technology and Management, Jhajjar, Haryana
  • Ravinder Panwar Department of Civil Engineering, Ganga Institute of Technology and Management, Jhajjar, Haryana

DOI:

https://doi.org/10.37628/jgget.v4i1.357

Abstract

Reinforced soil bed is improved soil strata from its weak unreinforced original form. By introducing reinforcing ties or strips the soil bed improves on its strength and is rendered less settleable. The compensations of introducing reinforcements have been widely studied by many researchers. The present work has evaluations, formulations and calculations for bearing capacity under certain seismic excitation when the strip footing on reinforced soil was subjected to eccentric loading. The contrast of bearing capacity of the footing when it is subjected to eccentric loading with that when subjected to uniform seismic loading and uniform vertical static loading has been done. The benefit of using layers of reinforcing ties in refining the seismic bearing capacity of the footing has been established.

References

A. Agrawal. Seismic bearing capacity of strip footing on reinforced soil, M. Tech. Thesis. IIT Roorkee, 2012.

W. Akram. Seismic bearing capacity of strip footing on reinforced soil subjected to eccentric load, M. Tech Thesis, IIT Roorkee, 2014.

J. Binquet, K.H. Lee. Bearing capacity analysis of reinforced earth slab, J Getech Eng ASCE. 1975; 101: 1251–76p.

M. Budhu, A. Al-Karni. Seismic bearing capacity of soils, Geotechnique. 1993; 43: 181–7p. Footings on slopes using limit equilibrium, Geotechnique 53(3): 363–9p.

P. Ghosh. Interference effect of two nearby strip footings on reinforced sand, Contemp Eng Sci. 2009; 2(12): 577p.

J. Kumar, N. Kumar. Seismic bearing capacity of rough. 2003.

Raghavendra, et al. Simplified approach to the analysis of reinforced soil bed as a two layer soil system, Ground Improv. 1998; 2: 93–101p.

H. Rangwala. Seismic bearing capacity of a strip footing adjacent to stable flow, PhD Thesis. IIT Roorkee; 2014.

R. Richards, D.G. Elms, M. Budhu. Seismic bearing capacity and settlements of foundations, J Geotech Eng. 1993; 119: 4662–7p.

R. Shahu, N. Som. Bearing capacity of a geo textile reinforced unpaved road as a function of deformation: a model study, Geosynth Int. 1999; 6(1): 1–17p.

A.H. Soubra. Seismic bearing capacity of shallow strip footings in seismic conditions, In: Proc Inst Civ Eng Geotech Eng. 1997; 125(4): 230–41p.

K. Terzaghi. Theoretical Soil Mechanics. Champan and Hall, London: John Willey and Sons; 1943.

Published

2018-06-20

Issue

Section

Articles